Post by dans on Aug 20, 2018 16:11:16 GMT -5
Finished up customizing the golf cart earlier in the summer - forgot to post pics until I received the Vectric newsletter today... the idea for the cart came from my boat (Pursuit DC325). I wondered if Pursuit built a golf cart what would it look like?
Started with my 2014 Club Car and got a little carried away.
Pretty much all of the material used was King Starboard - mostly white, some black and one piece is gray. All was done on the Axiom except for the covers where the front support tubes go into the fenders.
The dash consist of 15 pcs, the "swim platform" is three pieces, there are a couple spacers between where the top support tubes land between the seats. I had made all this stuff once, then went back and did them again once I figured out how to program a radius cutter to soften the edges. Last thing I added was the Garmin GPS - we live on an island with about 3 miles of road through the marinas so we don't need it, but Walmart had them for about $80 and I thought it was just a really stupid thing to do - had to do it.
A local boat customizer welded up the top and our canvas guy laced it with black Sumbrella. The steering column is from Ididit, with a marine steering wheel from Edson (modified by another shop to receive the spline on the shaft). Cup holders are from a Pursuit as are the rear armrests.
- Dan
Started with my 2014 Club Car and got a little carried away.
Pretty much all of the material used was King Starboard - mostly white, some black and one piece is gray. All was done on the Axiom except for the covers where the front support tubes go into the fenders.
The dash consist of 15 pcs, the "swim platform" is three pieces, there are a couple spacers between where the top support tubes land between the seats. I had made all this stuff once, then went back and did them again once I figured out how to program a radius cutter to soften the edges. Last thing I added was the Garmin GPS - we live on an island with about 3 miles of road through the marinas so we don't need it, but Walmart had them for about $80 and I thought it was just a really stupid thing to do - had to do it.
A local boat customizer welded up the top and our canvas guy laced it with black Sumbrella. The steering column is from Ididit, with a marine steering wheel from Edson (modified by another shop to receive the spline on the shaft). Cup holders are from a Pursuit as are the rear armrests.
- Dan
