|
Post by beckid on Jul 16, 2018 18:44:33 GMT -5
I've had my Axiom Pro6 for about 6 months and everything has worked great. Today I turned it on and hit the "Home" button and it make a crazy noise but it didn't move. I was able to manually move the x, y and z but when I moved the z all the way up, it kept wanting to go up.
I tried to set the z axis with the "Set Tool" button but it didn't touch and bounce up---instead it kept trying to do down.
Any ideas as to what is happening and why?
|
|
|
Post by beckid on Jul 17, 2018 9:21:15 GMT -5
After speaking to Chad at Axiom, we realized it was doing this due to the connector going into the Handheld Controller was not tight. Yay!!! Easy fix!
|
|