Post by rwebcon on Apr 8, 2018 20:49:00 GMT -5
On occasion during a long job my machine (Pro series) would stop with spindle running for no apparent reason. I had no response from the handheld, nothing I tried would show any response to my input except turning off the machine. On restart I had the option to resume from where it thinks it lost power and things seem to work fine. This happened several times over a few weeks. Well to make a lone story short an on a hunch I opened the controller box and checked and tightened down all lugs (some a little lose) attached to the controller board and anything else that I could tighten down where wires were attached. I have not had a problem since! Just a thought…… 
