|
|
Post by floatingsidewalk on Dec 24, 2017 12:57:24 GMT -5
I recently bought a 6 pro from rockler. I found the PDF manual online, but do not have any other setup info. Having a few issues with the initial setup!
Does the tool touch off Puck plug into the back of the gantry?
Also, what is the expected behavior when the drill head touches the puck? Mine seems to touch and pause for 5 seconds before returning to position. My smaller cnc returns immediately. I'm thinking there is something wrong as there is a small ding left in the puck!
|
|
|
|
Post by stevem on Dec 24, 2017 13:39:18 GMT -5
This is how you reset the Z speed for the tool touch off! Of course. Its called Toolset Speed. To change that setting: While one your main screen, Press MENU and Select the Auto Pro Setup. Scroll down to find Toolset Speed. (Not Toolset Fall) The Default setting is 600.00 *100.00 is barely moving. We'd suggest trying 3-400 first and see how that does for you.* Remember that if we ever send you a restore file, this will need changed again. Read more: axiomprecision.proboards.com/thread/132/change-pressure-speed-touch-off#ixzz52CmHyvHZ |
|
|
|
Post by savannahdan on Dec 24, 2017 15:07:40 GMT -5
Glad to see this since I just purchased a demo unit from a dealer and the bit stuck in the puck. I'll let him know as well as keep this in mind when using the cnc.
|
|
|
|
Post by traindriver on Dec 24, 2017 23:14:41 GMT -5
Savannahdan, did you purchase the one from Case Woodworking Supply?
|
|
|
|
Post by redwood on Dec 25, 2017 13:59:51 GMT -5
Yes the puck plugs in on the back, left side of the gantry. As far as the bits touching the puck and pausing, I haven't figured that one out yet. In 1 1/2+ years of owning my AR6 Pro, sometimes it returns immediately and other times in pauses for some time.
|
|
