|
|
Post by gerry on Nov 5, 2017 14:43:33 GMT -5
Unless the B18 is way different, you should be using the AXIOM HHC CNC (.mmg) post processor.
|
|
|
|
Post by stevem on Nov 5, 2017 15:02:32 GMT -5
You should be saving the file as Axiom HHC(mm)(*.mmg)
That is the post processor everyone is using for Axiom machines.
Once you create your vector and select the proper cutter you want to use, run the preview to make sure it looks correct.
Then save your tool path with the proper post processor. Everything should be good after that.
The post processor is in the drop down list. Just scroll down to it and select it.
After that, that will be the post processor you should always use.
|
|
|
|
Post by joejoe644 on Nov 5, 2017 15:44:38 GMT -5
It worked!! Thank you so much. I was bummed out when it wasn't working at first.. Unfortunately I was told by a Rockler manager to use G-code. But, Its all good. Thanks again gerry and stevem.
|
|
|
|
Post by stevem on Nov 5, 2017 19:57:51 GMT -5
Glad to hear everything worked out.
Everyone is here to help out each other!
|
|
