|
Post by giuntasfw on Sept 14, 2023 15:43:58 GMT -5
Has anybody had issues with the HUST CNC controller? I noticed with my past couple projects that the machine is not cutting square. Although I have my cuts programed correctly on the computer, my machine replicates it unevenly and slightly different every time. The machine seems to be very inconsistent, which makes me think it is a software issue in the remote. The machine was also bumped in delivery and required some parts to be replaced, so I'm assuming that's what threw it off to begin with.
|
|
|
Post by jgarciaa on Mar 3, 2024 20:42:10 GMT -5
Has anybody had issues with the HUST CNC controller? I noticed with my past couple projects that the machine is not cutting square. Although I have my cuts programed correctly on the computer, my machine replicates it unevenly and slightly different every time. The machine seems to be very inconsistent, which makes me think it is a software issue in the remote. The machine was also bumped in delivery and required some parts to be replaced, so I'm assuming that's what threw it off to begin with.
It seems like your HUST CNC controller might be causing inconsistencies in your cuts, possibly due to calibration or software issues. After the machine was bumped during delivery, it's important to ensure all replaced parts are correctly installed. If the problem persists, contact customer support for assistance. Also, consider checking out the Monport laser, known for its ease of use, high quality, and affordability, which could be an alternative solution. You can find more information on the Monport laser product at monportlaser.com/collections/co2-laser-engravers/products/monport-40w-lightburn-ready-12-x-8-co2-laser-engraver-cutter-with-fda-approval?sca_ref=5031521.ka374VZjm3
|
|