Post by skillforce on Aug 9, 2023 15:05:56 GMT -5
Looking for a CNC Router Operator
Your duties as a CNC router operator are to arrange machine setup properly before beginning work, read blueprints as instructions for cutting, and operate the machine safely. You will play a crucial role in translating design concepts into precise, custom-made cabinetry products for clients.
Do you have experience in the carpentry industry? Do you have the ability to show up every day on time and ready to work hard?
If so, we want you to be a part of our dynamic team! Skillforce Inc. is looking for a CNC operator with the ability to work within a crew of other talented craftsmen. You must be detail-oriented and able to work with minimal supervision. Pay is based on your experience and proven prior work history.
Essential Functions (Duties & Responsibilities):
• Set-up and operate CNC/Manual equipment with little to no supervision
• Edit programs on CNC/Manual equipment with little to no supervision
• Program CNC machines with guidance from senior personnel
• Ability to design and machine fixtures, as well as design and fabricate tooling, with minimal guidance from senior personnel
• Adjust workpiece and tooling offsets
• Use measuring instruments such as calipers, micrometers and bore gages to accurately perform measurements on finished parts, verifying compliance to drawing requirements
• Performs secondary operations in support of the machine shop, including but not limited to cutting and preparing raw material and washing parts as needed
• Achieve set-up and run time efficiency targets, proactively recommending, and implementing ideas for efficiency improvement
• Ability to comprehend geometric dimensioning and tolerance (GD&T)
Skills and Experience:
• Must have a 5+ years of set-up and operating experience.
• Experience with programming is a plus.
• Mazak experience preferred.
• Must have the ability to read and interpret documents (i.e. safety rules, operating and maintenance instructions, procedure manuals), write routine reports and correspondence, and have strong verbal and written communication skills.
• Must be able to calculate figures and amounts and have knowledge of the metric system or the ability to learn the metric system.
• Must have basic computer skills.
Pay $27.00-$33.00 per hour
Email your resume to: NOVA@skillforce.com
Call Mark at 571-685-1535 or
Call Dan at 703-591-1113
Your duties as a CNC router operator are to arrange machine setup properly before beginning work, read blueprints as instructions for cutting, and operate the machine safely. You will play a crucial role in translating design concepts into precise, custom-made cabinetry products for clients.
Do you have experience in the carpentry industry? Do you have the ability to show up every day on time and ready to work hard?
If so, we want you to be a part of our dynamic team! Skillforce Inc. is looking for a CNC operator with the ability to work within a crew of other talented craftsmen. You must be detail-oriented and able to work with minimal supervision. Pay is based on your experience and proven prior work history.
Essential Functions (Duties & Responsibilities):
• Set-up and operate CNC/Manual equipment with little to no supervision
• Edit programs on CNC/Manual equipment with little to no supervision
• Program CNC machines with guidance from senior personnel
• Ability to design and machine fixtures, as well as design and fabricate tooling, with minimal guidance from senior personnel
• Adjust workpiece and tooling offsets
• Use measuring instruments such as calipers, micrometers and bore gages to accurately perform measurements on finished parts, verifying compliance to drawing requirements
• Performs secondary operations in support of the machine shop, including but not limited to cutting and preparing raw material and washing parts as needed
• Achieve set-up and run time efficiency targets, proactively recommending, and implementing ideas for efficiency improvement
• Ability to comprehend geometric dimensioning and tolerance (GD&T)
Skills and Experience:
• Must have a 5+ years of set-up and operating experience.
• Experience with programming is a plus.
• Mazak experience preferred.
• Must have the ability to read and interpret documents (i.e. safety rules, operating and maintenance instructions, procedure manuals), write routine reports and correspondence, and have strong verbal and written communication skills.
• Must be able to calculate figures and amounts and have knowledge of the metric system or the ability to learn the metric system.
• Must have basic computer skills.
Pay $27.00-$33.00 per hour
Email your resume to: NOVA@skillforce.com
Call Mark at 571-685-1535 or
Call Dan at 703-591-1113