cncjrs
New Member
John Stephens
Posts: 7
|
Post by cncjrs on Feb 12, 2023 12:23:22 GMT -5
I was going to resurface a board and it took to big of a pass and machine stop and will not come back on
please help
|
|
toddd
New Member
Posts: 62
|
Post by toddd on Feb 12, 2023 13:13:23 GMT -5
I was going to resurface a board and it took to big of a pass and machine stop and will not come back on please help I don't have an Iconic machine but when this happens to my AR8 pro is because I've blown and internal fuse, maybe check your fuses |
|
cncjrs
New Member
John Stephens
Posts: 7
|
Post by cncjrs on Feb 12, 2023 13:19:58 GMT -5
internal fuse as in where, in the computer box?
|
|
|
|
Post by kokopelli2020 on Feb 12, 2023 21:56:09 GMT -5
Describe what you mean by come back on? Is there power to the machine, check vfr, if e-code then unplug until vfr goes off, if no power at all check for fuse or breaker box or power bar fuse.
|
|
toddd
New Member
Posts: 62
|
Post by toddd on Feb 12, 2023 22:43:29 GMT -5
internal fuse as in where, in the computer box? Thats where they are on my machine, 4 glass fuses 10 amp 250v |
|
jrg
New Member
Posts: 31 
|
Post by jrg on Feb 13, 2023 6:44:21 GMT -5
On the Iconic there's a fuse holder right beneath the power plug. Unplug your power cable, and then use a small flat head screw driver to pry the holder out.
|
|
