|
Post by mikemartin1 on Dec 31, 2022 16:59:39 GMT -5
I just got my iconic 8 assembled, attached all the add on’s . I purchased the laser as well. I turned on the machine and hit home and all went good. I turned on the power for the lazer and 10-15 seconds later the pendant went dark. Now I don’t know what to do….,
|
|
|
Post by jgarciaa on Feb 29, 2024 20:27:33 GMT -5
I just got my iconic 8 assembled, attached all the add on’s . I purchased the laser as well. I turned on the machine and hit home and all went good. I turned on the power for the lazer and 10-15 seconds later the pendant went dark. Now I don’t know what to do…., It seems like you're experiencing issues with your Iconic 8 CNC machine and laser setup. The sudden blackout of the pendant after turning on the laser power could indicate a power-related issue or a potential conflict between the CNC and laser components. To troubleshoot this problem, try disconnecting the laser power and see if the pendant comes back to life. If it does, there may be an incompatibility or power overload when both the CNC and laser are powered simultaneously. You can also check the connections and ensure everything is properly plugged in. In the meantime, considering the reliability and ease of use of the Monport laser might be worth exploring as an alternative solution. monportlaser.com/collections/co2-laser-engravers/products/monport-40w-lightburn-ready-12-x-8-co2-laser-engraver-cutter-with-fda-approval?sca_ref=5031521.ka374VZjm3
|
|