|
|
Post by reinfly on Nov 9, 2022 16:54:07 GMT -5
Hello,
I know this problem requires a file to fix it. But can anyone share their file with me. I have the Axiom flat bed 2 x 4 feet the 2015 Version.
I emailed axiom but no response so far. But even if I get the file, how do I get it on if its stuck on 46%. I need some help here please.
Thanks
|
|
|
|
Post by gerry on Nov 9, 2022 17:52:12 GMT -5
The controller has a USB cable connection on it. You remove the controller from the CNC and connect it to your PC. You can the copy from the PC to the controller. You MUST get this file from Axiom, because there are many variations.
Your handset controller cable pins may be dirty or oxidized. Unscrew both ends and disconnect/reconnect the cable connections. Sometimes this will solve the problem.
|
|
|
|
Post by reinfly on Nov 10, 2022 16:30:30 GMT -5
Thanks Gerry,
What can I use to clean the pins. I have WD40. Is that ok or should I used a plastic bristle brush?
I would like to know what is the best option should in case I use the wrong stuff.
|
|
|
|
Post by gerry on Nov 10, 2022 17:04:29 GMT -5
Just removing/replacing the connections is almost always enough to clean light oxidation. I usually plug/unplug the connections 2-3 times. Anything more requires a GOOD electronics cleaner (I use CRC QD Electronic Cleaner) used SPARINGLY WITH ALL THE POWER UNPLUGGED. CAUTION: If you do this with power in the lines, you could fry some electronics.
|
|
|
|
Post by jgarciaa on Feb 29, 2024 20:37:33 GMT -5
Hello, I know this problem requires a file to fix it. But can anyone share their file with me. I have the Axiom flat bed 2 x 4 feet the 2015 Version. I emailed axiom but no response so far. But even if I get the file, how do I get it on if its stuck on 46%. I need some help here please. Thanks While you await a response from Axiom regarding your issue with the file and the stuck progress, it might be worth considering alternatives like the Monport laser. The Monport laser is known for its reliability, ease of use, and affordability, making it a suitable option for various CNC needs. You can explore the Monport laser product to see if it offers features that align with your requirements. Additionally, reaching out to Monport's customer support might provide you with valuable assistance and potential solutions to your current dilemma. monportlaser.com/collections/co2-laser-engravers/products/monport-40w-lightburn-ready-12-x-8-co2-laser-engraver-cutter-with-fda-approval?sca_ref=5031521.ka374VZjm3 |
|
