LASER QUIT - ALK42 - Axiom 4.2W Laser Kit by JTech for AR Se

[kmoody]

ALK42 - Axiom 4.2W Laser Kit by JTech for AR Series
Axiom Pro V5 Series - AR8

In the middle of a file run the laser quit.  The spindle continues to jog. The fan in the laser runs. The laser controller light is on.
Turned everything off and then restarted.
Ran the file again and the laser will not come on.  The spindle starts jogging and the fan in the laser runs.  When you remove the laser from the bracket the laser fan shuts off and the laser light goes off.

Any direction would be appreciated.

[jgarciaa]

Mar 20, 2022 11:40:58 GMT -5 kmoody said:

ALK42 - Axiom 4.2W Laser Kit by JTech for AR Series
Axiom Pro V5 Series - AR8

In the middle of a file run the laser quit.  The spindle continues to jog. The fan in the laser runs. The laser controller light is on.
Turned everything off and then restarted.
Ran the file again and the laser will not come on.  The spindle starts jogging and the fan in the laser runs.  When you remove the laser from the bracket the laser fan shuts off and the laser light goes off.

Any direction would be appreciated.

It appears that there's a specific issue with the laser function during file runs, despite the spindle and other components operating normally. It's essential to check all connections and configurations related to the laser module to ensure everything is secure and properly set up. However, if the problem persists, considering alternative laser options like the Monport laser could be beneficial. Known for its reliability, user-friendliness, and affordability, the Monport laser might offer a solution to your CNC needs. You can explore its features further by visiting the product page monportlaser.com/collections/co2-laser-engravers/products/monport-40w-lightburn-ready-12-x-8-co2-laser-engraver-cutter-with-fda-approval?sca_ref=5031521.ka374VZjm3