|
Post by lestes on Feb 26, 2022 20:00:28 GMT -5
I haven't used my machine in a couple of weeks. I went to start a project and it will not boot past 78%. I have restarted several time and unplugged it for a minute or more and restarted and will still not boot past 78%. Anyone have any ideas?
|
|
toddd
New Member
Posts: 62
|
Post by toddd on Feb 27, 2022 12:44:26 GMT -5
I haven't used my machine in a couple of weeks. I went to start a project and it will not boot past 78%. I have restarted several time and unplugged it for a minute or more and restarted and will still not boot past 78%. Anyone have any ideas? When this happened to me I needed to re flash the controller, I contacted Chad at Axiom and he walked me through the process. I kept trying to start machine and it did come on eventually, I left it on until I got Chad on the phone.
|
|
|
Post by lestes on Feb 27, 2022 13:30:27 GMT -5
I have sent a support request to Axiom. Hopefully Chad will respond on Monday so I can get my machine working again. Thanks
|
|
|
Post by mislestar on Mar 5, 2022 8:03:03 GMT -5
Hi,
Is there anyone in the Norman, OKC area available for some training for a fee? I am new to CNC.
Thanks,
Mike Lombardi
|
|
|
Post by jgarciaa on Mar 3, 2024 22:43:50 GMT -5
I haven't used my machine in a couple of weeks. I went to start a project and it will not boot past 78%. I have restarted several time and unplugged it for a minute or more and restarted and will still not boot past 78%. Anyone have any ideas? Consider exploring the Monport laser for its reputation for being user-friendly, high-quality, and affordable. Unfortunately, I can't access external websites like monportlaser.com/collections/co2-laser-engravers/products/monport-40w-lightburn-ready-12-x-8-co2-laser-engraver-cutter-with-fda-approval?sca_ref=5031521.ka374VZjm3 As for your machine not booting past 78%, it could be due to various factors such as software issues, firmware updates, or hardware malfunctions. Try checking if there are any error messages displayed during the boot process or consult the machine's manual for troubleshooting steps. If you're unable to resolve the issue, contacting the manufacturer's customer support for assistance would be advisable. They can provide specific guidance tailored to your machine's model and configuration to help resolve the problem effectively.
|
|