|
|
Post by clemeod on Jan 8, 2022 12:43:08 GMT -5
Hello all, I am having an issue when trying to use the puck to set zero. When I push the toolset butting I get an error box with "can't tool setting without home!" I have shut down, restarted, and homed all axis's. I have also manually set all axis's to home by pushing the zrn button on my pendant. I still get the error. I have been able to manually set Z but I would like to use the puck again. Any thoughts would be appreciated.
Brian
|
|
|
|
Post by dadealeus on Jan 8, 2022 22:50:52 GMT -5
The quickest (and probably best) solution is to just call or email Axiom. I know it's the weekend, but they'll get you fixed up on Monday, I'm sure.
Speaking from experience, you're likely to bang your head against the wall for several hours before you end up having to contact them anyway. My issue was that (after several years of flawless usage), the machine started having issues traveling on the y-axis. I tried everything I could think of it the solution was to re-flash the firmware on the controller (which Axiom helped me with).
Somehow, my controller software simply became corrupted one day - perhaps a magnetic field near the controller... who knows.
The flash fixed everything and it's been fine ever since. This might or might not be a similar issue, but contacting Axiom will likely be your best bet.
|
|
