|
|
Post by goldendad on Sept 13, 2021 18:20:42 GMT -5
Axiom Pro V5 shutdown during job. E Stop switch not effected. Powered down for a few minutes and back on. I have a green switch light but VFD is black. Checked power at plug…220v. Spindle and gantry move freely. Seems like it would be in the computer box since the VFD isn’t even illuminated but the green switch light is?  No fuses on the outside. Any ideas besides call Chad tomorrow? |
|
toddd
New Member
Posts: 62
|
Post by toddd on Sept 13, 2021 23:02:22 GMT -5
Axiom Pro V5 shutdown during job. E Stop switch not effected. Powered down for a few minutes and back on. I have a green switch light but VFD is black. Checked power at plug…220v. Spindle and gantry move freely. Seems like it would be in the computer box since the VFD isn’t even illuminated but the green switch light is? No fuses on the outside. Any ideas besides call Chad tomorrow? search for blown fuse on this site and you will find a thread with a photo of where they are inside the case, get some extras as it happens once in a while, |
|
No fuses on the outside. Any ideas besides call Chad tomorrow?