kk
New Member
I'm a Japanese user CNC is used for manufacturing furniture etc.
Posts: 2
|
Post by kk on Jul 31, 2021 4:02:01 GMT -5
I want you to solve our elite8 problem
Problem flow
1, select the spindle
2, select positive
3, breaker trip
Is it a problem due to the inverter settings, etc.?
Or is it some other problem?
If you don't mind, please tell me how to set the inverter.
Thank you
|
|
kk
New Member
I'm a Japanese user CNC is used for manufacturing furniture etc.
Posts: 2
|
Post by kk on Oct 24, 2021 2:49:40 GMT -5
elite8 problem
I am using elite8 in japan
Other users can use it without any problems,
Only the elite8 I purchased doesn't work.
The manufacturer has determined that the spindle is the problem
I changed to a new spindle, but the result is the same
What does it mean that a 100 amp breaker trips when I try to rotate the spindle?
Is there a way to make sure the control box and cables are working properly?
Or is there something wrong with the inverter or computer?
|
|
|
|
Post by joeblow on Oct 24, 2021 16:08:32 GMT -5
What does it mean that a 100 amp breaker trips when I try to rotate the spindle?
Hi KK. Not sure about in Japan but in the US it means I got a bigger problem than a spindle. According to Axiom documentation the AR8Elite is pulling 10amps at 220v. There is no draw on this machine that should be tripping a 100amp breaker. Perhaps the problem is not related to your machine but rather the source of power for your machine.
|
|
