|
Post by gunner on Feb 19, 2021 19:27:21 GMT -5
I believe the machine i have is called ar6 basic. i noticed axiom has changed the names of their product line. Is the 4th axis controller compatible with my machine? I use a bosch router if it makes a difference on compatibility.
thanks.
|
|
|
Post by Kristy on Feb 22, 2021 12:42:10 GMT -5
I believe the machine i have is called ar6 basic. i noticed axiom has changed the names of their product line. Is the 4th axis controller compatible with my machine? I use a bosch router if it makes a difference on compatibility. thanks. Gunner, the Axiom basic series does not have 4th axis capability. The older Pro+, ProV5, and Elite models have 4th axis capability. If you have any questions, please give our team a call: (844) 642-4902
|
|
markd
New Member
Posts: 2
|
Post by markd on Nov 26, 2021 23:58:53 GMT -5
I have a similar question. I have an AutoRoute 8 Pro purchased in December 2015 SKU #AR8PRO . Is this machine compatible with the 4th Axis? If not is there a way to upgrade it to accept it?
TIA MarkD
|
|
|
Post by Axiom Tool Group on Dec 13, 2021 8:36:29 GMT -5
Mark, if purchased in 2015....the wiring SOP would be very difficult to upgrade.
A later version for the machine that did not see release until late 2016, could potentially be upgraded...but there would be additional information that is needed to confirm before taking those steps.
Unfortunately, the older machines remain 3-Axis only.
|
|