|
Post by edward on Feb 12, 2021 16:54:34 GMT -5
Help! I got the AR8 Pro V5 in December 2020. I been having a problem with the Tool Set. Three times the bit has broken when it hit the puck. The machine does not want to stop and continues downward until the bit breaks. Twice it was an 1/8 end mill bit and today it was a brand new 1/16 end mill. I make sure that the plug is in and center the bit on the puck. Is something causing this? I am getting a little gun shy when i push the tool set button.
thanks Ed
|
|
Bob
Junior Member
Posts: 129
|
Post by Bob on Feb 12, 2021 17:49:32 GMT -5
|
|
|
Post by edward on Feb 13, 2021 15:29:24 GMT -5
NOPE! I checked wiring, height of puck etc Since it has happen three times at random I not sure what causes this problem.
|
|
|
Post by gerry on Feb 13, 2021 16:51:17 GMT -5
Try lowering the TOOLSET SPEED. On my B18 controller I have it lowered to 150.0.
|
|