atra
New Member
I’m very new.
Posts: 2
|
Post by atra on Jan 18, 2021 17:18:24 GMT -5
I’ve been wanting to get a CNC machine for a long time. I found a great deal on a used Axiom PV5. I’m totally new to this and am trying to follow the manual as best as I can. I’m attempting to zero out the Z axis. I get to a spot in the manual that says “press the zero tool button”. I have no such button.. now what? thank you. paul
|
|
pieman
New Member
Retired USPS
Posts: 69
|
Post by pieman on Jan 18, 2021 20:34:41 GMT -5
The A11 controller uses ON/OFF + MENU buttons to start the Z-axis automatic tool height set. Press both buttons at the same time.
|
|
|
Post by Kristy on Jan 19, 2021 13:10:10 GMT -5
I’ve been wanting to get a CNC machine for a long time. I found a great deal on a used Axiom PV5. I’m totally new to this and am trying to follow the manual as best as I can. I’m attempting to zero out the Z axis. I get to a spot in the manual that says “press the zero tool button”. I have no such button.. now what? thank you. paul View AttachmentHey, Paul, we believe you have an older Pro model due to the A11 controller configuration. The current ProV5 manual does not cover this topic, as it has a different controller (B18 controller). Attached is a screenshot from the older manual covering the topic you are discussing. Unfortunately, the manual is too large to upload to the forum. If you can reach out to us: support@axiomtoolgroup.com and tell us the make/model of your machine, they will send the correct manual over to you. You can find the model on the back of your machine by the serial number.
|
|