|
Post by Barry K on Oct 4, 2020 13:41:33 GMT -5
I own a AR8 Pro and would appreciate some help to slow my Tool Set speed I have looked in my manual and it suggests that I go my Controller and go to MENU then Auto Pro Setup and then scroll thru the options until I get to Toolset Speed . Unfortunately I have tried by entering Menu then Auto Pro Setup which should show 11 options starting with Work Speed , but after the 9th option Work Array my option goes back Work Speed . The options Toolset Fall and Toolset Speed do not show up
If someone might tell me what I am doing wrong I will break fewer bits
Thank you in advance for your help
|
|
|
Post by ranger79 on Oct 5, 2020 12:40:10 GMT -5
I have the B18E handset and the Toolset Speed can be found under "Machine Setup" >"Toolset Setup" >"Toolset Speed". Hope that helps.
|
|
|
Post by Barry K on Oct 5, 2020 21:11:26 GMT -5
I have found "TOOLSET SPEED" which in my case reads 600 How do I change it ? I tried the up down errors What keystrokes do I need to make
|
|
|
Post by ranger79 on Oct 6, 2020 17:59:19 GMT -5
After you navigate to "Toolset Speed" do the following:
Press RUN/PAUSE DELETE (this highlights the current speed value) Enter the new value you want (i.e. 300) Press OK Press OK Press Stop/Cancel Press Stop/Cancel Press Stop/Cancel
That should do it for you.
|
|