|
|
Post by beans2toot on Oct 23, 2019 18:14:39 GMT -5
I have installed a firmware update and it seemed to go well, but after I restart the system I do the Home All and it goes where it belongs but sits there with the controller saying wait for all axis.
Any ideas what's wrong?
I would appreciate any help.
Gordon
|
|
|
|
Post by Axiom Tool Group on Oct 24, 2019 10:23:29 GMT -5
It probably waiting for the A-Axis to home.
That feature can be shut off by adjusting the HOME order in the MENU.
Just go into the main Menu and select the Machine Setup...then choose HOME setup and finally HOME Order.
Scroll down the list and select the option for Z, X & Y
Afterwards restart the machine and it should no longer be looking for the A-Axis.
|
|
|
|
Post by beans2toot on Oct 24, 2019 15:12:43 GMT -5
Thanks for the helpful reply and to Chad for his quick response to the email I sent on this problem
Kudos to Axiom
|
|
|
|
Post by brodie on Apr 12, 2024 10:41:43 GMT -5
Where can I find the firmware update file?
|
|
|
|
Post by gerry on Apr 12, 2024 15:10:43 GMT -5
Where can I find the firmware update file? Axiom tech support. |
|
