|
|
Post by jgstang on Jul 17, 2019 15:09:54 GMT -5
New here and hope this is the right place..I'm going to buy a used ar6 and wanted to know if vectric vcarve pro will work with this machine ? i was told no! thanks
|
|
|
|
Post by stevem on Jul 17, 2019 15:51:40 GMT -5
Any Vectric software will work with that machine. When you buy the software, just make sure you register it and all will be well. If you are buying the software used, you still need to register and pay a fee to re register it.
|
|
|
|
Post by gerry on Jul 17, 2019 17:41:36 GMT -5
....and... the software can only be transferred once. Only the original owner can transfer once.
|
|
|
|
Post by jgstang on Jul 17, 2019 23:54:41 GMT -5
ok cool! the guy that i'm going to buy the machine from thought it only works with i think RDWORKS.. and i bought my iconic cnc new in a package deal with vcarve pro and photo vcarve so i should be good.. I awesume that the ar6 24x36 is a good machine ? thanks
|
|
Bob
Junior Member
Posts: 137 
|
Post by Bob on Jul 18, 2019 7:37:11 GMT -5
Just a quick thought...Check to see if the seller has been posting on this, or any other forum. It's a way to see if there have been any problems with the machine.
|
|
|
|
Post by Axiom Tool Group on Jul 30, 2019 12:00:39 GMT -5
Vectric software...either VCarve or Aspire is the most recommended software in the small format industry.
This is the software that we ourselves use as well which gives us a greater ability to support customers who are also using it.
|
|
