dbornyk
New Member
In search of an exceptional desktop CNC machine. 2 Bad Experiences, and looking toward Axiom ...
Posts: 1
|
Post by dbornyk on Jul 12, 2019 14:23:36 GMT -5
Hi: I have a new i2R -4 that's going to be ordered soon. I use Vectric Aspire 9 Software and would like to know which Post Processor I use for the i2R?
I see the links for other machines in Axiom's Accessories Page, under Aspire; but nothing for i2R
Best Regards,
Doug Bornyk
|
|
|
Post by Axiom Tool Group on Jul 18, 2019 12:30:23 GMT -5
The i2R machines use the same controls as the Basic and Pro series...so the post processor would be the same.
|
|