|
Post by noland on Oct 21, 2018 15:20:13 GMT -5
Is anyone using BobCAD/CAM with the Axiom machine? If so, which post processor are you using or what one would be closest to being able to be used with it?
|
|
|
Post by noland on Oct 28, 2018 19:52:44 GMT -5
Well I got my machine and have run some v-carve gcode made from my BobCad software and have not had any snags as of yet. I still working with it and am about to make some code with a tool change and see how that turns out. But so far so good.
|
|