jax
New Member
Posts: 1
|
Post by jax on Jun 2, 2023 10:53:16 GMT -5
Hey! So I'm kinda new to the CNC, I know how to work it, and have done some projects on it. all of the sudden the x and y axis are not following the toolpath I made, I've made several but it either plunges into the workpiece or goes all the way to the side on the x axis and all the way up to the top right corner and tries to complete the toolpath on the complete wrong spot.
Any suggestions? Thanks Jax
|
|
|
Post by grossmsj on Jun 3, 2023 6:11:16 GMT -5
The quality of the responses will be proportional to the information you provide. Right now I'd say you're doing something wrong. Post a representative (Vectric?) file and a picture of the result for that file and we can be more specific.
|
|