mdrew
New Member
Posts: 1
|
Post by mdrew on Apr 1, 2023 11:08:03 GMT -5
The screen on my control is distorted. I tried to reboot the machine and get the same results. Any help will be appreciated. Thanks  |
|
|
|
Post by aluomala on Apr 1, 2023 13:02:19 GMT -5
Try tightening the connectors at each end, and failing that, remove connectors and clean out the fittings with compressed air or contact cleaner.
Otherwise, you'll probably have to wait until Monday and contact the help desk at Axiom and Chad can walk you through it.
Allan
|
|
