|
|
Post by gtokid1967 on Feb 13, 2022 15:09:37 GMT -5
Can the step distance of the axis be increased/decreased. Currently when jogging my axis it is done in .500 increments. Can this be changed to say .250, .125 increments? Sometimes I do intricate carving and instead of touching of the puck I like to do it manually to gain an extra .005-.010 of an inch of depth.
|
|
|
|
Post by gtokid1967 on Feb 13, 2022 15:46:24 GMT -5
In sorting through various posts I came up with the answer. Pressing the Fast/Slow/0 blue key toggles between fast and slow. Fast jogs the axis in .500mm increments (.0197), slow jogs in .100mm increments (.0039).
|
|
loren
New Member
Posts: 69
|
Post by loren on Feb 16, 2022 8:04:40 GMT -5
If you set your toolpaths for an initial depth of .01, you can just mindlessly use the touch puck for each tool change and get the same end result that you're getting from a meticulous manual z set.
|
|
