|
|
Post by callman on Aug 29, 2021 18:49:12 GMT -5
Just bought a AR6 Pro and got it setup, turned on it powered up but error on pendant. turned off and back on everything worked as should. next day turned on and vfd showing reading and pendant is backlit but blank(nothing) on pendant. tried a couple time same thing?
|
|
|
|
Post by gerry on Aug 29, 2021 18:58:45 GMT -5
New, used??
|
|
|
|
Post by callman on Aug 29, 2021 19:11:32 GMT -5
used
|
|
|
|
Post by gerry on Aug 29, 2021 19:48:06 GMT -5
Plug and unplug all controller connections. Sometimes they are a little corroded. Email Chad with your machine serial #, info etc. Explain your problem. He can send you a new controller init program. After multi retries, you may be able to get a good reboot. Then you can flash the controller with the new program. There's a good chance that this will revive it.
|
|
|
|
Post by callman on Aug 30, 2021 7:31:44 GMT -5
Plug and unplug all controller connections. Sometimes they are a little corroded. Email Chad with your machine serial #, info etc. Explain your problem. He can send you a new controller init program. After multi retries, you may be able to get a good reboot. Then you can flash the controller with the new program. There's a good chance that this will revive it. |
|
|
|
Post by callman on Aug 30, 2021 7:33:08 GMT -5
Plug and unplug all controller connections. Sometimes they are a little corroded. Email Chad with your machine serial #, info etc. Explain your problem. He can send you a new controller init program. After multi retries, you may be able to get a good reboot. Then you can flash the controller with the new program. There's a good chance that this will revive it. Thanks |
|
