savantpcs
New Member
Always learning, always training
Posts: 23
|
Post by savantpcs on Sept 17, 2020 11:30:54 GMT -5
Here is the scenario. I just bought a Axiom ProV5 AR6. All my cad/cam experience is in Fusion 360 prior to this machine. I got the "Axiom Autopro RichAutoA11_m3x.cps" from a rep at Axiom.
To test I made a 40mm square that is 5mm tall
Made the setup in fusion using the post processor mentioned above
The model is all in metric
Posted the gcode file using document settings
it cuts at 86.64mm square and not with squared edges, with rounded edges for some reason.
Troubleshooting I have done: 1. I went through the manual and made sure the defaults on the RichAuto B18E matched and some were definitly not 2. When it first started it wasnt even completing a square but now it is and I have no idea why
|
|
|
Post by Axiom Tool Group on Sept 17, 2020 14:16:00 GMT -5
Update:
This was corrected by updating settings within the controller.
Those settings effected the movement/distance scale for machine movements.
|
|