|
Post by gerry on Feb 15, 2019 1:30:52 GMT -5
I finished setting up my new laser. It works!! The addendum that came with the laser says to change the SPINDLE DELAY (from 4000 to 0) and the AUTO PRO SETUP/GCODE/SPINDLE from FORCE to NTLLG. It works, but what is it? Does it have to be set to FORCE when returning back to spindle?
|
|
|
Post by uzumati on Feb 15, 2019 8:14:29 GMT -5
I never changed it back and have never had an issue running the router, also I change safe height to 1 when using the laser. I takes a little unneeded movement out of the toolpath.
|
|