|
Post by aussie on Nov 29, 2018 20:26:49 GMT -5
Setup the AR 6 Pro, installed V Carve and UCCNC control software. First cut on MDF for test purposes.
|
|
|
Post by bauldy on Nov 30, 2018 7:09:59 GMT -5
Well Done!
Bauldy
|
|
|
Post by savannahdan on Nov 30, 2018 13:42:05 GMT -5
Do you use a pendant or a larger control device? I looked at one that shows the progress of the work while the cnc is cutting but the cost for me to convert was way too expensive.
|
|