|
Post by gnorwalt on Nov 2, 2018 7:19:29 GMT -5
Hi, Im new to Axiom. We should be receiving our first machine in the next week or so and Im excited to get started. I use ArtCAM for all my modeling and was wondering which post processor I should try since there isnt an official Axiom post. Any suggestions? Thanks
|
|
|
Post by stevem on Nov 2, 2018 10:11:12 GMT -5
You should check first with ArtCam to see if they have a post processor for an Axiom machine.
|
|
|
Post by gnorwalt on Nov 2, 2018 17:10:17 GMT -5
Thanks Steve, Autodesk actually killed off ArtCAM this year and they dont have a post processor for it unfortunately. I can probably use one of the other processors they have written for, just not sure what type of machine would be a close match.
|
|
|
Post by stevem on Nov 2, 2018 20:11:02 GMT -5
You will probably have to air cut with a few post processors to see if any will work. I do believe there was a post on this forum regarding Art Cam, but am not sure. Try calling Chad to see if he has any ideas.
|
|
|
Post by gnorwalt on Nov 4, 2018 14:00:01 GMT -5
Thanks Steve. I will try air cutting before calling. I appreciate the help.
|
|
|
Post by traindriver on Nov 15, 2018 21:43:10 GMT -5
The Laguna Swift uses a RichAuto A11 cnc controller (which is what my older AR8 Pro has and I assume you have) - perhaps the Artcam has a postprocessor for it?
|
|