X and Y axis coupler problem

new

« Prev
1
Next »

jteagle
New Member

Posts: 6

X and Y axis coupler problem Aug 4, 2018 20:06:04 GMT -5

Quote

Post by jteagle on Aug 4, 2018 20:06:04 GMT -5

Was cutting away then X stop moving the motor was running but the screw wasn't. Fixed that by tightening the cap screw on coupler. Now Y is doing the same thing but the cap is stripped out and can't tighten it up. What size is the cap screw itself?
Thank you
John

Axiom Tool Group Administrator Posts: 584	X and Y axis coupler problem Aug 6, 2018 16:10:01 GMT -5 Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by Axiom Tool Group on Aug 6, 2018 16:10:01 GMT -5 It should be 2.5mm

X and Y axis coupler problem

Post by jteagle on Aug 4, 2018 20:06:04 GMT -5

Post by Axiom Tool Group on Aug 6, 2018 16:10:01 GMT -5