|
Post by scottlee37 on Apr 8, 2018 12:50:44 GMT -5
Hi I'm have an issue, after cutting 3 signs with no trouble, I get this message on my handheld "ERROR THERE IS IN THE MACHINE COORDINATES STATE, CANT SET THE WORK PIECE ORIGNAL PLEASE SWITCH TO THE WORK PIECE STATE. I can home the machine and move all X,Y,and Z but when i hit the zero out the message pops up , what do i do to get it to switch to work piece state,
|
|
pieman
New Member
Retired USPS
Posts: 69
|
Post by pieman on Apr 8, 2018 17:06:49 GMT -5
Hold the MENU button and press 1 to get back to the work state.
|
|
|
Post by scottlee37 on Apr 8, 2018 19:51:50 GMT -5
Thank you Thank you Thank you !!!!!!!!
|
|
|
Post by Ander on Dec 3, 2019 9:36:26 GMT -5
Hold the MENU button and press 1 to get back to the work state. Thank U man, God bless U
|
|
|
Post by flynfuzz on Jan 8, 2021 14:58:39 GMT -5
I had the same issue today. I tried to call Chad. But he was on another call. I should have searched here in the Forum first. I found the answer with a quick search. And I wouldn't have had to bother Chad. Lesson learned for the next time ! Thanks, all.
|
|
|
Post by gollyrojer on Feb 27, 2022 19:21:33 GMT -5
Thanks, guys. Now could somebody explain WHY this works?
|
|
|
Post by gerry on Feb 27, 2022 23:02:33 GMT -5
Read your manual.
|
|
|
Post by dadealeus on Mar 1, 2022 22:23:26 GMT -5
Thanks, guys. Now could somebody explain WHY this works? Just think of that feature (MENU + 1-9) as bookmarks for various origins you might want to set and have the machine remember.
For example, let's say you make wooden cutting boards and coasters and sell them online. You make the cutting boards on the side of your machine closest to the front, and the coasters toward the back of the machine - that way you can run one job while you are getting the other one set up to run next. You have pins/braces/locators/whatever to make sure your cutting boards are always in the same spot and your coasters are always in the same spot.
You can set one home for the cutting boards (MENU + 1), then another for your coasters (MENU + 2). So, when you want to cut a cutting board, you switch to coordinate system one (MENU + 1), and run the program for the board. If you want to cut coasters, you switch to the second system (MENU + 2) and run the coaster program.
Personally, I have one set just to move the gantry all the way to the back of the machine (MENU + 3, then ORIGIN - after I set the origin, of course) so that whenever I want to load and unload a large piece of stock, the gantry is moving out of the way while I'm getting the stock ready to place on the machine without me having to hold the buttons to move the gantry manually.
|
|