ronm
New Member
Posts: 23 
|
Post by ronm on Dec 8, 2017 11:54:02 GMT -5
If you haven't noticed on the Axiomprecision.com website under training they are offering more training sessions with Michael Mezalick both Level 1 and 2. I went to one of Michael's seminars in June and he leapfrogged me into the nuances of the Vectric software and opened up many tips and tricks that cannot be gained by watching their tutorials. If you have recently purchased a machine and are overwhelmed by the possibilities then I HIGHLY recommend the Level 1. If you are moving into the second stage of the learning curve then Level 2 will greatly advance that forward movement.
For the money it cost there is no better cost benefit result that I have been able to find. I'm not sure how many, if any, other opportunities there will be to have training by Michael but he will definitely help you learn how to drive your machine to it's fullest, as the body is important but is useless without the most sophisticated engine(software).
|
|
|
|
Post by gerry on Dec 8, 2017 14:43:18 GMT -5
+1 on the training classes from Axiom with Michael Mezalick. I took one in September when I ordered my machine. The class was excellent. What was also great was that you get a thumb drive containing all of the class visuals.
|
|
309cnc
Junior Member
Posts: 124
|
Post by 309cnc on Feb 25, 2018 15:49:59 GMT -5
Attended the Level 1 class last week and I second everything stated already about the class. WELL WORTH the time. Also, you get to meet all the Axiom guys and can ask any hardware question you might have as well.
|
|
|
|
Post by ricphoto on Feb 25, 2018 17:14:43 GMT -5
Too bad there's not an equivalent training on the west coast...or is there?
|
|
|
|
Post by traindriver on Feb 25, 2018 21:54:23 GMT -5
Surely there is. I just found out a couple of days ago that some people from Vectric are going to be in Columbia, South Carolina at a place called McGrew's April 26 through April 28, 2018 doing Aspire training.
|
|
|
|
Post by redwood on Feb 26, 2018 12:56:06 GMT -5
I was on the wait list for Vectric's visit to Las Vegas last year, that is the only thing I've seen on the West Coast.
|
|
|
|
Post by Mezalick on Feb 26, 2018 13:02:15 GMT -5
Surely there is. I just found out a couple of days ago that some people from Vectric are going to be in Columbia, South Carolina at a place called McGrew's April 26 through April 28, 2018 doing Aspire training. Greetings, and thanks for the nice words about the training. It was a pleasure to meet everyone. As for the Camp at Jim McGrew's in Columbia, SC. I'm also helping Jim out with that event.. It's not about Vectric training but rather about meeting people and hearing what others are doing with the software. Of course there will be some instructional material but nothing like what I give at Axiom.. Biki Jeremy and Todd Bailey from Vectric will be there as well as several others of great talent. The topic of the rotary will be a major session with Gary Campbell, Randall Newcomb and Brady Watson. Here is the Agenda for those that are interested. The seats are filling up so if you have any interest, please sign up today. 2018 Aspire Camp agenda-Version 4.pdf (112.57 KB) Thanks again and hope to see more at the next training session. Michael Mezalick |
|
|
|
Post by ricphoto on Feb 26, 2018 15:07:43 GMT -5
I was on the wait list for Vectric's visit to Las Vegas last year, that is the only thing I've seen on the West Coast. I'll keep an eye out and would appreciate a heads up if anyone comes across something over here on the left coast...surely there's got to be enough interested users to justify a session or two... |
|
|
|
Post by scottbuehler01 on Feb 26, 2018 21:29:14 GMT -5
Im in Utah, but if there were a class going through Vegas, I would love to attend...
|
|
