|
Post by dickdelmi on Oct 23, 2017 16:24:12 GMT -5
I have a keyhole slot toolpath created on Vectric that I would like to move to machine memory so that it is always available. How do I do this?
|
|
|
Post by gerry on Oct 23, 2017 19:13:42 GMT -5
Page 38 of the A11 User Manual, "5.2 Import processing files".
|
|
|
Post by dickdelmi on Oct 25, 2017 13:04:37 GMT -5
How do I get the A11 user manual?
|
|
|
Post by stevem on Oct 25, 2017 14:32:29 GMT -5
You can download it from the Axiom Site!
|
|
|
Post by stevem on Oct 25, 2017 14:34:47 GMT -5
Just select the model of machine you have. Scroll down to the information and you will see a manual download to click on.
|
|
pieman
New Member
Retired USPS
Posts: 69
|
Post by pieman on Oct 25, 2017 15:47:05 GMT -5
You can look at the manuals, but here are the steps: Put the file on your UDisk and plug it into your A11 controller. On the A11 controller: Press MENU Scroll to OPERATE FILE Press OK Copy file should be highlighted - Press OK UDisk File should be highlighted - Press OK Scroll to the file on the udisk you want to copy - Press OK You should see that the file was copied successfully. Press CANCEL until you are back to the main screen.
|
|