|
Post by gene35146 on Aug 15, 2017 19:08:15 GMT -5
Is there some setting in the Aspire software or changes to the processor you can say return to home when the job is complete the same as hitting home all home position on the controller?
|
|
|
Post by Gary Campbell on Aug 15, 2017 19:32:52 GMT -5
gene.. 2 step process.
1) Find out what the code line is that performs the action. It could be as simple as "G0 X0Y0" 2) Add that to your post processor. Post processor editing guide under Vectric's Help menu
|
|
pieman
New Member
Retired USPS
Posts: 69
|
Post by pieman on Aug 15, 2017 21:11:48 GMT -5
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Aug 17, 2017 13:29:58 GMT -5
In the Material Setup tab you can define the Home position that the toolpaths will go to when they are done.
|
|
|
Post by gene35146 on Aug 17, 2017 20:51:15 GMT -5
I dont seem to have that option? Attachments:
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Aug 18, 2017 11:13:49 GMT -5
That's from the top of the design entry page (F11 shortcut). The Material Setup is at the top of the Toolpaths Operations page (F12 shortcut).
|
|
|
Post by gene35146 on Aug 19, 2017 11:10:14 GMT -5
In Aspire 9 the F11 key is to toggle drawing tab on. Is there another path to that page? I think it is material setup you can get to from the toolpath tab. What is return to max height a zero as well?
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Aug 20, 2017 16:38:52 GMT -5
F12 is the shortcut to the Toolpaths tab and Material setup is at the top of that section.
|
|
|
Post by gene35146 on Aug 29, 2017 19:34:45 GMT -5
There is an actual setting on the controller that you can set to do this each time -- learned a number of things last week (:
Steps are:
Menu Auto Pro Setup Stop Status Change setting to back home
|
|
|
Post by Axiom Tool Group on Nov 9, 2017 11:45:57 GMT -5
Is there some setting in the Aspire software or changes to the processor you can say return to home when the job is complete the same as hitting home all home position on the controller? There are parameters in the controller, called Stop States that can be used to do a number of things after the file has completed. If you go into the MENU and select the Machine Setup, if you scroll down you'll see the Stop Statue (bad Chinese translation). One of the parameters is set to PickupZ by default. If you highlight this and press the Delete button, you will see the other options that you can choose from, of which Returning Home is one of. Some users have a Stop Location setup similar to an Origin, so after completion of the file the machine will raise the Z and move to that location. This is helpful for bit changes or material removal in pendulum manufacturing. With jobs that are simply repeating the same process, after the material has been swapped out, the RUN+9 command to repeat the last process can be used to resume.
|
|