|
Post by David and Karen on Jan 28, 2020 18:17:23 GMT -5
I was running my machine on a project, and finished it last night, so I turned it off after taking the steps to be able to shut it down - then when I went to turn it back on this morning, it wouldn't even turn on, despite me pressing the power button.
Does anyone know what would cause this, and how to fix it?
|
|
Bob
Junior Member
Posts: 129
|
Post by Bob on Jan 28, 2020 20:39:20 GMT -5
If you pressed that big red power button to shut the machine off, you will need to rotate it, instead of just pushing it, so the machine will turn back on.
|
|
|
Post by David and Karen on Jan 28, 2020 20:46:02 GMT -5
I have turned the emergency switch and pulled it on and off, but the green backlit power button still won't come on despite pushing in and out. I even took the panel off the white box and peered at the electrical wires inside, and when the machine is plugged in; when the power button is pushed but no light to the power button and the emergency switch is off; a light pops on inside the box, in the clear knob looking thing. I also sent a message to the support through the support email, but thought I'd see if maybe there was a simple solution.
|
|
|
Post by David and Karen on Jan 29, 2020 18:08:10 GMT -5
Found out from the support that I blew a fuse inside the electrical box; that's why the one thing lights up when we test it but the power button doesn't. -Thanks for the help though.
|
|