|
Post by baotloi on Jan 25, 2020 16:38:25 GMT -5
I recently created a file to run via usb for the first time. I research into the processor for fusion360 and used Rs274 which seems to be the common post processor that would or should work. I loaded the file onto the usb and at the controller selected the file. After selecting the file the machine will not run the spindle nor run the file. Any idea as to what I could do? Attached is the image of where it loads but won't run the file. Photo
|
|
|
Post by Mezalick on Jan 26, 2020 6:35:53 GMT -5
I recently created a file to run via usb for the first time. I research into the processor for fusion360 and used Rs274 which seems to be the common post processor that would or should work. I loaded the file onto the usb and at the controller selected the file. After selecting the file the machine will not run the spindle nor run the file. Any idea as to what I could do? Attached is the image of where it loads but won't run the file. PhotoCan you post the MMG file or email it to me. I'll take a look Michael mm@mezalick.com
|
|