|
Ripple
Jan 16, 2020 22:11:14 GMT -5
Post by damonlayne on Jan 16, 2020 22:11:14 GMT -5
I created a raindrop ripple using a molding toolpath. I would like to have the outer rings of a second smaller raindrop join into the outer rings of the larger raindrop. Right now, one toolpath cuts off the other. Any idea how I can get one contour to flow/join into the other contour? Ripple1.zip (187.93 KB)
|
|
|
Ripple
Jan 17, 2020 4:48:57 GMT -5
Post by Mezalick on Jan 17, 2020 4:48:57 GMT -5
I created a raindrop ripple using a molding toolpath. I would like to have the outer rings of a second smaller raindrop join into the outer rings of the larger raindrop. Right now, one toolpath cuts off the other. Any idea how I can get one contour to flow/join into the other contour? Damonlayne,,what you're asking for can't be done with the Molding toolpath alone. You could , if you're using Aspire, create a component from the 3-D preview and a bit of sculpting to get the end result. Maybe some hand sanding would also do the trick. Paul Rowntree had a gadget to create the drop effect but I'm nit sure where it is and if it works with the new versions of the software. paulrowntree.weebly.com/gadgets.htmlMichael
|
|
|
Ripple
Jan 17, 2020 5:06:11 GMT -5
Post by Mezalick on Jan 17, 2020 5:06:11 GMT -5
|
|