Post by Axiom Tool Group on Aug 5, 2019 13:37:51 GMT -5
In my experience, this is from the button order used to run the file.
You should only be using the RUN button to bring up a menu...you will then use the OK button to select the USB and the file itself.
On the other hand, if you go into the MENU and select the File Operations...you will not be able to run tool-path from that set of MENU selections.
If you refer to your manual, it should illustrate going through the RUN button to select the file for operation. If you'd like, please feel free to give us a call as well and we can discuss the steps taken....and walk through it over the phone, while you are at the machine.