|
Post by butterflyqueen on May 11, 2019 15:32:40 GMT -5
Hi there, I'm a new user here, so be kind. I have the pro+8 running Vcarve pro and have the Rich Auto 18 controller. I'm trying to run my first job but it doesn't recognize my file type, .crv. What could be my issue(s)
Thanks
|
|
pieman
New Member
Retired USPS
Posts: 69
|
Post by pieman on May 11, 2019 16:35:54 GMT -5
The .crv file is for Vcarve pro. You need to run a tool path and save it to a USB drive as a .mmg file. Save the tool path with the Axiom post processor. The post processor choice comes up when you select save tool path in the Toolpath side of Vcarve. The little disk icon.
|
|
|
Post by butterflyqueen on May 11, 2019 17:21:18 GMT -5
Thank you!!
|
|