|
|
Post by jbwjim on Nov 8, 2018 14:23:55 GMT -5
Can those of you who had faulty RichAuto A11 Controllers, tell me how the situation was rectified? Mine went out on me. Thanks in advance. Jim
|
|
zaxis4
Junior Member
Posts: 162 
|
Post by zaxis4 on Nov 8, 2018 21:14:41 GMT -5
Mine went out about 1 month ago. Chad emailed a software update. I had the same issue quite awhile ago and the update worked. This time it did not. I sent it in for them to try some things on it. However not before I purchased a new one. The old A11 was able to be revived at their facility so now I have 2. The B11 is better quality anyway so Im happy. Try the update, chances are it will reboot. Not really sure why I could not make it work and they could but.....  |
|
|
|
Post by Jimjbw on Nov 9, 2018 12:01:08 GMT -5
Was the B11 Plug and Play for the Axiom? Thanks for the info. I got the update, it fixed the startup problem, but now anytime I jog any axis, the Spindle comes on and I have to physically turn it off. Jog again, spindle comes on. What's up with that?
|
|
