|
Post by uzumati on Oct 8, 2018 9:28:54 GMT -5
Trying to cut my biggest sign to date 18” x 46” and keep getting y limit error. Checking my table size in machine setup I noticed x is set to 610mm and z to 150mm which are both close to what they should be by measuring but my y was set to 950mm which is way short of the 4’ an 8+ should be. After getting out my metric stick I set y to 1210mm and the job is cutting fine now. Could anyone with an 8 double check their table size for me and post what it should be?
|
|
|
Post by stevem on Oct 8, 2018 12:33:51 GMT -5
I don't have a AR8, but the table size should be X 610mm and Y 1220. It will also be in your manual.
|
|
309cnc
Junior Member
Posts: 124
|
Post by 309cnc on Oct 9, 2018 18:21:25 GMT -5
My max x/y travel from home are 610/1210mm.
|
|
mt1ss
New Member
Posts: 34
|
Post by mt1ss on Oct 29, 2018 13:22:59 GMT -5
i'm a noob and getting this same error. Being a noob I have no idea where to look in the setups. AR8 Pro 2 x 4 foot version
|
|
|
Post by uzumati on Oct 30, 2018 8:05:37 GMT -5
i'm a noob and getting this same error. Being a noob I have no idea where to look in the setups. AR8 Pro 2 x 4 foot version If I remember correctly on the hand held it is menu > machine setup > table size. thanks 309 that’s what I set mine to but 1210 was about 10mm short of the full 4’ so I wanted to double check
|
|