|
Post by gerry on Jan 29, 2018 16:02:04 GMT -5
AR8 Pro+ with B18 controller. Is there a function for 'Time Remaining' for the current toolpath? Sometimes I forget to check the time before I start a toolpath.
|
|
|
Post by redwood on Jan 29, 2018 21:26:27 GMT -5
On my controller, as a toolpath is running, it cycles some info at the bottom of the display. One of them is how long this particular toolpath has been running.
|
|
|
Post by gerry on Jan 29, 2018 21:34:04 GMT -5
On my controller, as a toolpath is running, it cycles some info at the bottom of the display. One of them is how long this particular toolpath has been running. Other people have mentioned this. I don't see it on mine. I faintly remember seeing it on mine when I just got it. I must have somehow cleared the option.
|
|
|
Post by Axiom Tool Group on Jan 29, 2018 22:25:00 GMT -5
Gerry, on the B18 controllers it does not appear to scroll that information on the bottom of the screen.
I do not think there is a setting to change that, but I will look into it.
|
|