|
Post by jroetz on Jan 7, 2020 8:37:02 GMT -5
We get a "Waiting for Tool Off" notice on the B58 controller when we try to restore from a breakpoint. Any ideas on what we're doing wrong?
|
|
|
Post by Axiom Tool Group on Jan 9, 2020 8:07:28 GMT -5
Had you set the Z-0 using the Toolset puck? Before trying to restore from the stored break point...
|
|
|
Post by jroetz on Jan 9, 2020 12:39:57 GMT -5
We did not.
|
|
|
Post by jroetz on Jan 26, 2020 17:10:59 GMT -5
We're still having this problem, if we set a breakpoint, and try to restart from the breakpoint, we get the "Waiting for Tool Off" notification on the B58 controller. Note that we didn't power off the machine, there should be no need to rezero anything, correct?
|
|
|
Post by JTCNC on Feb 11, 2020 18:42:10 GMT -5
I was wondering if you found out the fix for this problem. We are experiencing this "Waiting for Tool Off" notification when trying to initially start the tool path.
|
|
|
Post by jroetz on Feb 12, 2020 10:26:10 GMT -5
We have not found a fix for this, right now we're not using any breakpoints because we can't get past this notification.
|
|
|
Post by jroetz on May 17, 2020 21:31:35 GMT -5
We get a "Waiting for Tool Off" notice on the B58 controller when we try to restore from a breakpoint. Any ideas on what we're doing wrong? Does anyone have a solution for this? We never resolved this issue.
|
|
|
Post by jroetz on Jan 17, 2021 11:49:21 GMT -5
No one else has this problem? We can't return from a breakpoint at all, this feature is worthless to us right now. Attachments:
|
|
|
Post by Chad on Jan 18, 2021 10:32:33 GMT -5
For the B58 Elite controllers, this problem should have been corrected with a firmware update.
Go into your MENU and select the Version View option...
The current firmware version should read T8-245.
Please email our support team and they should be able to provide any required updates.
|
|