|
|
Post by provolone on Nov 30, 2019 21:35:58 GMT -5
Just got my AR 8 pro. Do I have to set the Z0 origin at the same spot as the xy origin. If I do jog it in either direction to make more room for my puck, do I need to do anything else to set the origins prior to starting my file? Thanks for the help.
|
|
|
|
Post by Mezalick on Dec 1, 2019 2:09:28 GMT -5
The Z Zero can be done from anyplace.
For example, if you set the Z Zero to the machine bed in the software, and your spoil board is flat and level, any place will work.
If you choose to Z Zero from the top of the material, than again, if the material is flat, any place will work.
I would suggest to always use only one location for the project you are working on.
It'll reduce the possibilities of error in Z Zeroing.
Michael
|
|
|
|
Post by provolone on Dec 1, 2019 12:50:59 GMT -5
Thanks for the help
|
|
