|
Post by lostcreekwoodworking on Nov 18, 2019 17:22:26 GMT -5
I have an Axiom Precision AR8 with the original controller (3 years old). How do I upload a file to the controller off the flash drive? I find that on long tool paths it stops. Once uploaded how do I then remove the file?
|
|
pdabk
New Member
Posts: 16
|
Post by pdabk on Nov 23, 2019 10:24:08 GMT -5
Use a usb 2.0 drive to upload your files from your computer. BUT make sure to "eject" the usb drive before removing it from your computer, especially with large toolpath files. Otherwise you will corrupt your usb drive and will have to reformat it. Hope this helps Josh
|
|
|
Post by Axiom Tool Group on Nov 26, 2019 13:27:45 GMT -5
Assuming that you are looking to save the files to internal memory....as would be recommended for jobs longer than 1 hour.
From the main coordinate screen, press MENU...then scroll down and select the Operate File option. There you will see COPY, DELETE and VIEW.
Through this menu...you can only COPY files from the USB to the internal memory and DELETE files from the internal memory etc..
|
|