|
Post by powdermillcreek on Jul 13, 2019 7:50:54 GMT -5
When I went to start the cnc this morning while running through it start-up routine it got Stuck at 46% and just set there, I tried to reboot a few time same problem un-pluged everything and restarted an same problem. Anyone have this issue know how to fix it?
Thanks
|
|
|
Post by stevem on Jul 13, 2019 17:27:51 GMT -5
I had the same problem a few months ago. Call Axiom and they will provide you with a file to download, load it onto a usb drive and update the firm ware on the controller. Takes about 5 min in total and all will be wonderful.
|
|
|
Post by Axiom Tool Group on Jul 18, 2019 12:32:32 GMT -5
You will need to contact our Support team with the machine and controller model (A11, B11 or B18 etc.) and we will provide you with the required firmware file and install instructions.
That firmware update will correct this startup error.
support@axiomtoolgroup.com
|
|