|
|
Post by junjun2019 on Jun 9, 2019 3:18:56 GMT -5
Can somebody help me whats wrong with my router the spindle wont run after not using it for 1 month thanks!
|
|
|
|
Post by gerry on Jun 9, 2019 3:22:28 GMT -5
What model? Is it a router or spindle?
|
|
|
|
Post by junjun2019 on Jun 9, 2019 3:44:25 GMT -5
The latest ir 4
|
|
|
|
Post by Axiom Tool Group on Jun 10, 2019 14:24:28 GMT -5
Make sure that the RPM is set to a number above F0.000 on the VFD found on front of the white control box.
It may sound ridiculous....but we regularly see where the RPM is simply just set to zero.
If all is set correctly, you may also need to check the fuses inside the white control box. Especially if you have been cutting aggressively or using a large tool during the last run cycle.
|
|
|
|
Post by woody2424 on Jun 6, 2020 21:53:30 GMT -5
How do you check the fuses, there is nothing in the manual on where they are. Seems like its info that should be in there.
|
|
